-
AS 1172.1:2005
Water closets (WC) - Pans
-
AS 1172.2:1999
Water closet (WC) pans of 6/3 L capacity or proven equivalent - Cisterns
-
AS 1357.1
Valves primarily for use in heated water systems - Protection valves
-
AS 1357.2
Valves primarily for use in heated systems - Part 2:Control valves
-
AS 1432
Copper tubes for plumbing, gasfitting and drainage applications
-
AS 1589:2001
Copper and copper alloy waste fittings
-
AS 1628
Water supply - Metallic gate, globe and non-return valves
-
AS 1646:2007
Elastomeric seals for waterworks purposes
-
AS 1910
Water supply - Float control valves for use in hot and cold water
-
AS 2537
Mechanical jointing fittings for use with crosslinked polyethylene (XLPE) pipes for hot and cold water applications
-
AS 2638.2
Gate valves for waterworks purposes - Part 1: Resilient seated
-
AS 2887
Plastic waste fittings
-
AS 3494
Bidettes and bidets
-
AS 3495
Authorization requirements for plumbing products - Stainless steel non-pressure pipes and fittings
-
AS 3498
Authorization requirements for plumbing products - Water heaters and hot-water storage tanks
-
AS 3571
Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
-
AS 3688:2005
Water supply - Metallic fittings and end connectors
-
AS 3795
Copper alloy tubes for plumbing and drainage applications
-
AS 4032.1
Water supply - Valves for the control of heated water supply temperatures - Part 1: Thermostatic mixing valves - Materials design and performance requirements
-
AS 4032.2
Water supply - Valves for the control of heated water supply temperatures - Part 2: Tempering valves and end-of-line temperature-actuated devices
-
AS 4176:1994
Polyethylene / aluminium and cross-linked polyethylene / aluminium macro composite pipe systems for pressure applications
-
AS 4181:1999
Stainless steel clamps for waterworks purposes
-
AS 4794:2001
Non-return valves-Swing check and tilting disc
-
AS 4796:2001
Water supply-Metal-bodied and plastic-bodied ball valves for property service connection
-
AS 5200.007-2008
Plumbing and drainage products Part 007: Metal-bodied water hammer arresters
-
AS 5830.1
In-line ball valves for use in plumbing water supply systems - Metal-bodied
-
AS 5830.2
In-line ball valves for use in plumbing water supply systems - Plastics-bodied
-
AS/NZS 1260:2009
PVC pipes and fittings for drain, waste and vent applications
-
AS/NZS 2492:2007
Cross-linked polyethylene (PE-X) pipes for pressure applications
-
AS/NZS 2642.2:2008
Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 2642.3:2008
Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2712
Solar and heat pump water heaters - Design and construction
-
AS/NZS 2845.1
Water supply - Backflow prevention devices - Part 1: Materials, design and performance requirements
-
AS/NZS 2845.2
Water supply-Backflow prevention devices - Part 2: Air gaps and break tanks
-
AS/NZS 3497
Drinking water treatment units - Plumbing requirements
-
AS/NZS 3499
Water supply - Flexible hose assemblies
-
AS/NZS 3518:2004
Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications
-
AS/NZS 3662:2005
Performance of showers for bathing
-
AS/NZS 3718
Water supply - Tap ware
-
AS/NZS 3879
Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
-
AS/NZS 3982:1996
Urinals
-
AS/NZS 4129
Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4130:2009
Polyethylene (PE) pipes for pressure applications
-
AS/NZS 4327
Metal-banded flexible couplings for low-pressure applications
-
AS/NZS 4401
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethene (PE)
-
AS/NZS 4441:2008
Oriented PVC (PVC-O) pipes for pressure applications
-
AS/NZS 4765:2007
Modified PVC (PVC-M) pipes for pressure applications
-
AS/NZS 4936
Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems
-
ATS 5200.004
Technical Specification for plumbing and drainage products Part 004: Flushing cisterns
-
ATS 5200.006
Technical Specification for plumbing and drainage products Part 006: Reflux valves, sewerage
-
ATS 5200.007
Technical Specification for plumbing and drainage products Part 007: Water hammer arrestors
-
ATS 5200.012:2005
Technical Specification for plumbing and drainage products Part 012: Control/isolating valves
-
ATS 5200.014
Technical Specification for plumbing and drainage products Part 014: Jointing materials
-
ATS 5200.016
Technical Specification for plumbing and drainage products Part 016: Cistern inlet valves
-
ATS 5200.017
Technical Specification for plumbing and drainage products Part 017: Cistern outlet valves
-
ATS 5200.020
Technical Specification for plumbing and drainage products Part 020: Flushing valves for water closets and urinals - For use with mains supply
-
ATS 5200.021
Technical Specification for plumbing and drainage products Part 021: Flushing valves for water closets and urinals - or use with break tank supply
-
ATS 5200.026
Technical Specification for plumbing and drainage products - Cold water storage tanks
-
ATS 5200.028
Technical Specification for plumbing and drainage products Part 028: Commercial food waste disposal units (FWDU)
-
ATS 5200.030
Technical Specification for plumbing and drainage products Part 030: Solenoid valves
-
ATS 5200.033
Technical Specification for plumbing and drainage products Part 033: Spraying apparatus/dispensing units with the option of chemical additions - Hose connected
-
ATS 5200.037
Technical Specification for plumbing and drainage products Part 037: Flow controllers
-
ATS 5200.037.2
Technical Specification for plumbing and drainage products - Flow controllers - For use in heated or cold water plumbing systems
-
ATS 5200.040
Technical Specification for plumbing and drainage products Part 040: Waste pipe connection outlets and gratings, separate or integral
-
ATS 5200.042
Technical Specification for plumbing and drainage products Part 042: Roll-grooved jointing systems
-
ATS 5200.046
Technical Specification for plumbing and drainage products Part 046: Diversion systems - Wash down and first flush
-
ATS 5200.047
Technical Specification for plumbing and drainage products Part 047: Self-sealing traps
-
ATS 5200.050
Technical Specification for plumbing and drainage products - Prefabricated bathroom modules
-
ATS 5200.051
Technical Specification for plumbing and drainage products - Bidet douche seats
-
ATS 5200.052
Technical Specification for plumbing and drainage products Part 052: Valving system pressure limiting
-
ATS 5200.101
Technical Specification for plumbing and drainage products Part 101: Appliances (low risk)
-
ATS 5200.103
Technical Specification for plumbing and drainage products Part 103: Water treatment systems (other than those specified in AS/NZS 3497)
-
ATS 5200.104
Technical Specification for plumbing and drainage products Part 104: Appliances (miscellaneous)
-
ATS 5200.105
Technical Specification for plumbing and drainage products Part 105: Appliances - Beverage dispensers and icemakers
-
ATS 5200.420
Technical Specification for plumbing and drainage products - Trap-priming valves
-
ATS 5200.453
Technical Specification for plumbing and drainage products Part 453: Heated water systems -Thermostatic circulation valve
-
ATS 5200.458
Technical Specification for plumbing and drainage products Part 458: Universal transition fitting
-
ATS 5200.459
Technical Specification for plumbing and drainage products Part 459: Waterless urinals - Wall hung (Level 1)
-
ATS 5200.460
Technical Specification for plumbing and drainage products Part 460: Grey water diversion valve assembly
-
ATS 5200.461
Technical Specification for plumbing and drainage products Part 461: Stainless steel tubes and mechanical compression fittings for pressure applications
-
ATS 5200.462
Technical Specification for plumbing and drainage products Part 462: Rainwater tank connection valve
-
ATS 5200.463
Part 463: Positive air pressure attenuator
-
ATS 5200.464
Technical Specification for plumbing and drainage products Part 464: Hot water manual or sensor-activated pumping systems
-
ATS 5200.466
Technical Specification for plumbing and drainage products Part 466: Rainwater tank connection devices
-
ATS 5200.467
Technical Specification for plumbing and drainage products Part 467: Rainwater tank connection valve
-
ATS 5200.468
Technical Specification for plumbing and drainage products Part 468: Thermostatic controlled circulation valves
-
ATS 5200.471
Technical specification for plumbing and drainage products - Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems
-
ATS 5200.477
Technical Specification for plumbing and drainage products - Rainwater/mains supply changeover devices
-
ATS 5200.485
Technical Specification for plumbing and drainage products - Pressure compensating tank
-
ATS 5200.501
Technical Specification for plumbing and drainage products - Anti-infiltration overflow-relief device
-
EN 295
Vitrified clay pipes and fittings and pipe joints for drains and sewers (all parts)
-
EN 877
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
-
WMTS 004
Urinal Flushing Cisterns
-
WMTS 006
WMTS 006-2014 : WaterMark Technical Specification - Reflux valves —Sewerage
-
WMTS 012
In-line valves for use in plumbing water supply systems – Miscellaneous types metallic and non-metallic
-
WMTS 014
Jointing materials
-
WMTS 016
Cistern inlet valves
-
WMTS 017
Cistern outlet valves
-
WMTS 020
Flushing valves for water closets and urinals – For use with mains supply
-
WMTS 021
Flushing valves for water closets and urinals – For use with break tank supply
-
WMTS 026
Cold water storage tanks
-
WMTS 028
Commercial food waste disposal unit
-
WMTS 030
Solenoid valves
-
WMTS 033
Spraying apparatus/dispensing units with the option of chemical additions – Hose connected
-
WMTS 040
Waste pipe connection outlets and gratings, separate or integral
-
WMTS 042
Roll-grooved jointing systems
-
WMTS 046
Diversion systems – Wash down and first flush
-
WMTS 047
Self-sealing devices
-
WMTS 050
Prefabricated bathroom modules
-
WMTS 051
Bidet douche seats
-
WMTS 052
Metallic-bodied inlet pressure control valves greater than DN 50
-
WMTS 101
Appliances (low hazard rating)
-
WMTS 103
Water treatment systems (other than those specified in AS/NZS 3497)
-
WMTS 104
Appliances (miscellaneous)
-
WMTS 105
Appliances – Beverage dispensers and icemakers
-
WMTS 420
Trap-priming valves
-
WMTS 453
Heated water systems – Thermostatic circulation valve
-
WMTS 459
Waterless urinals – Wall hung
-
WMTS 460
Grey water diversion device (GWDD)
-
WMTS 463
Pressure attenuator
-
WMTS 464
Hot water manual or sensor-activated pumping systems
-
WMTS 466
Rainwater tank connection devices
-
WMTS 467
Rainwater tank connection valve
-
WMTS 468
Hot water systems – Recirculation valves
-
WMTS 477
Rainwater/mains supply changeover devices
-
WMTS 485
Pressure compensating tank
-
WMTS 489
Stainless steel flexible assemblies for pumping applications
-
WMTS 501
Anti-infiltration overflow-relief device
-
WMTS 520:2016
Semi-Flexible Metallic Hose Assemblies