-
ANSI Z358.1-2014
Emergency Eyewash And Shower Equipment
-
ANSI Z97.1
Safety Glazing Materials Used in Buildings - Safety Performance Specifications and Methods of Test
-
ANSI/ISEA Z87.1:2015
American National Standard Occupational and Educational Personal Eye and Face Protection Devices
-
AS 1172.1:2014
Water closets (WCs) Part 1: Pans
-
AS 1172.2:2014
Water closets (WCs) Part 2: Flushing devices and cistern
-
AS 1223
Industrial hand cleaners (petroleum solvent type)
-
AS 1316
Masonry cement
-
AS 1353.1
Flat synthetic-webbing slings - Product specification
-
AS 1432:2004
Copper tubes for plumbing, gasfitting and drainage applications
-
AS 1499-1996
Personal flotation devices - Type 2
-
AS 1512-1996
Personal flotation devices - Type 1
-
AS 1546.3:2017
On-site domestic wastewater treatment units - Secondary treatment systems
-
AS 1577
Scaffold Planks
-
AS 1579-2001
Arc-welded steel pipes and fittings for water and waste-water
-
AS 1589:2001
Copper and copper alloy waste fittings
-
AS 1603.1-1997 (R2016)
Automatic fire detection and alarm systems - Heat detectors
-
AS 1603.2-1997
Automatic fire detection and alarm systems - Point type smoke detectors
-
AS 1603.3
Automatic fire detection and alarm systems - Heat alarms
-
AS 1609
Eye protectors for motor cyclists and racing car drivers
-
AS 1646:2007
Elastomeric seals for waterworks purposes
-
AS 1657:2018
Fixed platforms, walkways, stairways and ladders - Design, construction and installation
-
AS 1672.1
Limes and limestones - Limes for building
-
AS 1753-1990
Webbing for restraining devices for occupants of motor vehicles
-
AS 1851
Maintenance of fire protection systems and equipment
-
AS 2047:2014
Windows and external glazed doors in buildings
-
AS 2049
Roof Tiles
-
AS 2080:2019
Safety glazing for land vehicles
-
AS 2142-1978
Reflectors for pedal bicycles
-
AS 2161.6-2003
Occupational protective gloves - Protective gloves for firefighters - Laboratory test methods and performance requirements
-
AS 2210.3:2019
Personal protective equipment Safety footwear (ISO 20345:2011, MOD)
-
AS 2210.5:2019
Personal protective equipment Occupational footwear (ISO 20347:2012, MOD)
-
AS 2227
Yachting harnesses and lines - Conventional lines
-
AS 2260-1996
Personal flotation devices - Type 3
-
AS 2325
Tungsten filament lamps for general service - Performance requirements
-
AS 2351
Nappy sanitizers
-
AS 2419.1:2005
Fire hydrant installations - System design, installation and commissioning
-
AS 2419.2:2009
Fire hydrant installations - Part 2: Fire hydrant valves
-
AS 2419.3:2012
Fire hydrant installations - Part 3: Fire brigade booster connections
-
AS 2432-1991
Babies' dummies
-
AS 2537
Mechanical jointing fittings for use with crosslinked polyethylene (XLPE) pipes for hot and cold water applications
-
AS 2638.1
Gate valves for waterworks purposes - Part 1: Metal seated
-
AS 2657-1985
Powered rotary lawnmowers
-
AS 2726.1
Chainsaws - Safety requirements - Chainsaws for general use
-
AS 2726.2
Chainsaws - Safety requirements - Chainsaws for tree service
-
AS 2792-1992
Fire hose - Delivery layflat
-
AS 2869
Tampons - Menstrual
-
AS 2942
Wheelchair occupant restraint assemblies for motor vehicles
-
AS 3119
Approval and test specification for normal bayonet lampholder adaptors
-
AS 3517
Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
-
AS 3547-1997
Breath alcohol testing devices for personal use
-
AS 3547:2019
Breath alcohol testing devices
-
AS 3565.1-2010
Meters for cold and heated drinking and non-drinking water supplies, Part 1: Technical requirements
-
AS 3582.1
Supplementary cementitious materials for use with portland and blended cement - Fly ash
-
AS 3582.2
Supplementary cementitious materials for use with portland and blended cement - Slag - Ground granulated iron blast-furnace
-
AS 3648
Specification and methods of test for packaged concrete mixes
-
AS 3688:2005
Water supply - Metallic fittings and end connectors
-
AS 3688:2016
Water supply and gas systems - Metallic fittings and end connectors
-
AS 3715-2002
Metal finishing - Thermoset powder coating for architectural applications of aluminium and aluminium alloys
-
AS 3718:2021
WATER SUPPLY - TAP WARE
-
AS 3743-2003
Potting mixes
-
AS 3786:2014
Smoke alarms using scattered light, transmitted light or ionization
-
AS 3952:2002
Water supply - Spring hydrant valve for waterworks purposes
-
AS 3972
Portland and blended cements
-
AS 3996-2006
Access covers and grates
-
AS 3996:2019
Access covers and grates
-
AS 4123.1:2008
Mobile waste containers Containers with two wheels and a capacity up to 400 L for lifting devices - Dimensions and design
-
AS 4123.2-2008
Mobile waste containers - Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices - Dimensions and design
-
AS 4176.2
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold plumbing applications - Pipes (ISO 21003-2:2008 MOD)
-
AS 4176.3
Multilayer pipes for pressure applications - Multilayer piping systems for hot and cold plumbing applications - Fittings (ISO 21003-3:2008 MOD)
-
AS 4176.8-2010
Multilayer pipes for pressure applications - Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
-
AS 4176:1994
Polyethylene / aluminium and cross-linked polyethylene / aluminium macro composite pipe systems for pressure applications
-
AS 4177.1
Caravan and light trailer towing components - Towbars and towing brackets
-
AS 4177.2
Caravan and light trailer towing components - 50 mm towballs
-
AS 4177.3
Caravan and light trailer towing components - Coupling body for ball couplings
-
AS 4181:1999
Stainless steel clamps for waterworks purposes
-
AS 4256.1
Plastic roof and wall cladding materials - General requirements
-
AS 4256.2
Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) building sheets
-
AS 4256.3
Plastic roof and wall cladding materials - Glass fibre reinforced polyester (GRP)
-
AS 4256.4
Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards
-
AS 4256.5
Plastic roof and wall cladding materials - Polycarbonate
-
AS 4265-1995
Wheeled fire extinguishers
-
AS 4381:2015
Single-use face masks for use in health care
-
AS 4422:2016
Playground surfacing - Specifications, requirements and test method
-
AS 4428.16-2015
Fire detection and alarm systems Emergency warning control and indicating equipment
-
AS 4428.16:2020
Fire detection, warning, control and intercom systems - Control and indicating equipment, Part 16: Emergency warning control and indicating equipment
-
AS 4428.3
Fire detection, warning, control and intercom systems - Control and indicating equipment - Fire brigade panel
-
AS 4454
Composts, soil conditioners and mulches
-
AS 4662
Ceramic tiles - Definitions, classification, characteristics and marking
-
AS 4666:2012
Insulating glass units
-
AS 4758.1
Personal flotation devices - General requirements
-
AS 4758.1-2008
ifejackets - Part 1: General requirements
-
AS 4758.1:2015
Lifejackets -General requirements
-
AS 4775-2007
Emergency eyewash and shower equipment
-
AS 4793:2020
Mechanical tapping bands for waterworks purposes
-
AS 4794:2001
Non-return valves-Swing check and tilting disc
-
AS 4795
Butterfly valves for waterworks purposes
-
AS 4795.1:2011
Butterfly valves for waterworks purposes - Wafer and lugged
-
AS 4795.2:2011
Butterfly valves for waterworks purposes - Double flanged
-
AS 4796:2001
Water supply-Metal-bodied and plastic-bodied ball valves for property service connection
-
AS 4796:2016
Water supply - Metal-bodied and plastic-bodied ball valves for property service connection
-
AS 4883:2017
Air Valves for Sewerage – ANZIC 22
-
AS 4956
Air valves for water supply
-
AS 4956-2017
Air valves for water supply
-
AS 4967:2019
Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting
-
AS 5039
Security screen doors and security window grilles
-
AS 5041
Methods of test - Security screen doors and window grilles
-
AS 5062:2016
Fire protection for mobile and transportable equipment
-
AS 5081
Hydraulically operated automatic control valves for waterworks purposes
-
AS 5082.2-2007
Polybutylene (PB) plumbing pipe systems - Metric series - Mechanical and fusion jointing systems
-
AS 5200.037.2
Plumbing and drainage products - Flow controllers for use with heated or cold water systems
-
AS 5200.053
Plumbing and drainage products - Stainless steel pipes and tubes for pressure applications
-
AS 5830.1
In-line ball valves for use in plumbing water supply systems - Metal-bodied
-
AS 5830.2
In-line ball valves for use in plumbing water supply systems - Plastics-bodied
-
AS 6401
Knife gate valves for waterworks purposes
-
AS 6669
Plywood Formwork
-
AS 7240.1
Fire detection and alarm systems - General and definitions
-
AS 7240.10
Fire detection and alarm systems - Point-type flame detectors
-
AS 7240.11
Fire detection and alarm systems - Manual call points (ISO 7240-11:2005, MOD)
-
AS 7240.12:2018
Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam (ISO 7240-12:2014, MOD)
-
AS 7240.13
Fire detection and alarm systems - Compatibility assessment of system components
-
AS 7240.15
Fire detection and alarm systems - Multisensor fire detectors (ISO7240-15:2004,MOD)
-
AS 7240.2
Fire detection and alarm systems - Control and indicating equipment (ISO 7240-2:2003, MOD)
-
AS 7240.21
Fire detection and alarm systems - Routing equipment
-
AS 7240.22
Fire detection and alarm systems - Smoke-detection equipment for ducts (ISO 7240-22:2007, MOD)
-
AS 7240.4
Fire detection and alarm systems - Power supply equipment (ISO 7240-4:2003, MOD)
-
AS 7240.5
Fire detection and alarm systems - Point type heat detectors (ISO7240-5:2003, MOD)
-
AS 7240.6
Fire detection and alarm systems - Carbon monoxide fire detectors using electro-chemical cells
-
AS 7240.7
Fire detection and alarm systems - Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD)
-
AS 7240.8
Fire detection and alarm systems - Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
-
AS ISO 7240.17
Fire detection and alarm systems - Short-circuit isolators
-
AS ISO 7240.18
Fire detection and alarm systems - Input/output devices
-
AS ISO 7240.23
Fire detection and alarm systems - Visual alarm devices
-
AS ISO 7240.24
Fire detection and alarm systems - Sound-system loudspeakers
-
AS ISO 7240.25
Fire detection and alarm systems - Components using radio transmission paths
-
AS ISO 7240.27
Fire detection and alarm systems - Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
-
AS ISO 7240.3
Fire detection and alarm systems - Audible alarm devices
-
AS/NZS 1067.1:2016
Eye and face protection - Sunglasses and fashion spectacles Requirements
-
AS/NZS 1221:1997
Fire hose reels
-
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1260:2017
PVC-U pipes and fittings for drain, waste and vent applications
-
AS/NZS 1270:2002
Acoustics - Hearing protectors
-
AS/NZS 1328.1
Glued laminated structural timber - Performance requirements and minimum production requirements
-
AS/NZS 1337
Eye protectors for industrial applications
-
AS/NZS 1337.1
Personal eye protection - Eye and face protectors for occupational applications
-
AS/NZS 1337.1:2010
Personal eye protection Eye and face protectors for occupational applications
-
AS/NZS 1337.2:2012
Personal eye protection - Mesh eye and face protectors for occupational applications
-
AS/NZS 1337.4
Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
-
AS/NZS 1337.5
Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
-
AS/NZS 1337.6
Personal eye protection - Prescription eye protectors against low and medium impact
-
AS/NZS 1337.6:2012
Personal eye protection Prescription eye protectors against low and medium impact
-
AS/NZS 1338.1:1992
Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations
-
AS/NZS 1338.1:2012
Filters for eye protectors - Filters for protection against radiation generated in welding and allied operations
-
AS/NZS 1477:2017
PVC pipes and fittings for pressure applications
-
AS/NZS 1546.1:2008
On-site domestic wastewater treatment units - Septic tanks
-
AS/NZS 1546.2:2008
On-site domestic wastewater treatment units - Waterless composting toilets
-
AS/NZS 1546.3:2008
On-site domestic wastewater treatment units - Aerated wastewater treatment systems
-
AS/NZS 1576.3
Scaffolding - Prefabricated and tube-and-coupler scaffolding
-
AS/NZS 1698
Protective helmets for vehicle users
-
AS/NZS 1716:2003
Respiratory protective devices
-
AS/NZS 1716:2012
Respiratory protective devices
-
AS/NZS 1730
Washbasins
-
AS/NZS 1753:2015
Webbing for restraining devices for occupants of motor vehicles
-
AS/NZS 1754
Child restraints for use in motor vehicles
-
AS/NZS 1754:2004
Child restraint systems for use in motor vehicles
-
AS/NZS 1754:2010
Child restraint systems for use in motor vehicles
-
AS/NZS 1754:2013
Child restraint systems for use in motor vehicles
-
AS/NZS 1801
Occupational protective helmets
-
AS/NZS 1801:1997
Occupational protective helmets
-
AS/NZS 1841.1
Portable fire extinguishers - General requirements
-
AS/NZS 1841.2:2007
Portable fire extinguishers - Specific requirements for water type extinguishers
-
AS/NZS 1841.3:2007
Portable fire extinguishers - Specific requirements for wet chemical type extinguishers
-
AS/NZS 1841.4:2007
Portable fire extinguishers - Specific requirements for foam type extinguishers
-
AS/NZS 1841.5:2007
Portable fire extinguishers - Specific requirements for powder type extinguishers
-
AS/NZS 1841.6:2007
Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
-
AS/NZS 1841.7:1997
Portable fire extinguishers - Specific requirements for vaporizing-liquid type extinguishers
-
AS/NZS 1841.8
Portable fire extinguishers - Specific requirements for non-rechargeable type extinguishers
-
AS/NZS 1859.1
Reconstituted wood-based panels - Specifications - Particleboard
-
AS/NZS 1859.2
Reconstituted wood-based panels - Specifications - Dry-processed Fibreboard
-
AS/NZS 1859.3
Reconstituted wood-based panels - Specifications - Decorative overlaid wood panels
-
AS/NZS 1859.4
Reconstituted wood-based panels - Specifications - Wet-processed Fibreboard
-
AS/NZS 1860.1
Particleboard Flooring - Specification
-
AS/NZS 1891.1:2007
Industrial fall-arrest systems and devices - Harnesses and ancillary equipment
-
AS/NZS 1891.2
Industrial fall-arrest systems and devices - Horizontal lifeline and rail systems
-
AS/NZS 1891.3
Industrial fall-arrest systems and devices - Fall-arrest devices
-
AS/NZS 1892.1
Portable ladders - Metal
-
AS/NZS 1892.2
Portable ladders - Timber
-
AS/NZS 1892.3
Portable ladders - Reinforced plastic
-
AS/NZS 1927
Pedal bicycles - Safety requirements
-
AS/NZS 2063
Bicycle helmets
-
AS/NZS 2063:2008
Bicycle helmets
-
AS/NZS 2063:2020
Helmets for use on bicycles and wheeled recreational devices
-
AS/NZS 2080
Safety glazing for land vehicles
-
AS/NZS 2088
Prams and strollers - Safety requirements
-
AS/NZS 2161.3:2020
OCCUPATIONAL PROTECTIVE GLOVES PROTECTION AGAINST MECHANICAL RISKS
-
AS/NZS 2161.6:2014
Occupational protective gloves - Protective gloves for structural firefighting - Laboratory test methods and performance requirements
-
AS/NZS 2172:2013
Cots for household use - Safety requirements
-
AS/NZS 2208:1996
Safety glazing materials in buildings
-
AS/NZS 2210.2
Safety, protective and occupational footwear - Guide to selection, care and use
-
AS/NZS 2210.3:2000
Occupational protective footwear - Specification for safety footwear
-
AS/NZS 2210.3:2009
Occupational protective footwear - Specification for safety footwear (ISO 20345:2004, MOD)
-
AS/NZS 2210.4
Occupational protective footwear - Specification for protective footwear (ISO 20346:2004, MOD)
-
AS/NZS 2210.5
Occupational protective footwear - Specification for occupational footwear (ISO 20347:2004, MOD)
-
AS/NZS 2269.0:2012
Plywood- Structural Part:0 Specifications
-
AS/NZS 2270
Plywood and blockboard for interior use
-
AS/NZS 2271
Plywood and blockboard for exterior use
-
AS/NZS 2272
Plywood - Marine
-
AS/NZS 2280:2014
Ductile iron pipes and fittings
-
AS/NZS 2280:2020
Ductile iron pipes and fittings
-
AS/NZS 2290.1
Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas
-
AS/NZS 2343
Bullet-resistant panels and elements
-
AS/NZS 2492:2007
Cross-linked polyethylene (PE-X) pipes for pressure applications
-
AS/NZS 2537.1
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD)
-
AS/NZS 2537.2
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications - Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD)
-
AS/NZS 2588
Gypsum plasterboard
-
AS/NZS 2588:2018
Gypsum plasterboard
-
AS/NZS 2596:2003
Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD)
-
AS/NZS 2615
Hydraulic trolley jacks
-
AS/NZS 2638.1
Gate valves for waterworks purposes - Metal seated
-
AS/NZS 2638.1:2011
Gate valves for waterworks purposes -Metal seated
-
AS/NZS 2638.2
Gate valves for waterworks purposes - Resilient seated
-
AS/NZS 2638.2:2011
Gate valves for waterworks purposes -Resilient seated
-
AS/NZS 2642.2:2008
Polybutylene (PB) plumbing pipe systems - Polybutylene (PB) pipe for hot and cold water applications
-
AS/NZS 2642.3:2008
Polybutylene (PB) plumbing pipe systems - Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
-
AS/NZS 2693
Vehicle jacks
-
AS/NZS 2712
Solar and heat pump water heaters - Design and construction
-
AS/NZS 2803.1
Doors - Security screen - Hinged
-
AS/NZS 2845.1:2010
Water supply - Backflow prevention devices - Materials, design and performance requirements
-
AS/NZS 2904
Damp-proof courses and flashings
-
AS/NZS 2906:2001
Fuel containers - Portable-plastic and metal
-
AS/NZS 2908.1
Cellulose-cement products - Corrugated sheets
-
AS/NZS 2908.2
Cellulose-cement products - Flat sheet
-
AS/NZS 3191:2008
Electric flexible cords
-
AS/NZS 3504:2006
Fire Blankets
-
AS/NZS 3518:2013
Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
-
AS/NZS 3582.3
Supplementary cementitious materials for use with portland and blended cement - Amorphous silica
-
AS/NZS 3584.3
Diesel engine systems for underground coal mines - Maintenance
-
AS/NZS 3584.3:2012
Diesel engine systems for underground coal mines - Maintenance
-
AS/NZS 3662:2005
Performance of showers for bathing
-
AS/NZS 3718
Water supply - Tap ware
-
AS/NZS 3718:2005
Water supply - Tap ware
-
AS/NZS 3838:1998
Helmets for horse riding and horse-related activities
-
AS/NZS 3838:2006
Helmets for horse riding and horse-related activities
-
AS/NZS 3879
Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
-
AS/NZS 3982:1996
Urinals
-
AS/NZS 4020
Testing of products for use in contact with drinking water
-
AS/NZS 4058
Precast concrete pipes (pressure and non-pressure)
-
AS/NZS 4067:2004
Firefighters' helmets
-
AS/NZS 4129
Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4129:2008
Fittings for polyethylene (PE) pipes for pressure applications
-
AS/NZS 4130:2018
Polyethylene (PE) pipes for pressure application
-
AS/NZS 4131
Polyethylene (PE) compounds for pressure pipes and fittings
-
AS/NZS 4158
Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
-
AS/NZS 4200.1
Pliable building membranes and underlays - Materials
-
AS/NZS 4327
Metal-banded flexible couplings for low-pressure applications
-
AS/NZS 4357.0
Structural laminated veneer lumber - Specifications
-
AS/NZS 4401
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethene (PE)
-
AS/NZS 4422:1996
Playground surfacing - Specifications, requirements and test method
-
AS/NZS 4441:2017
Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2014, MOD)
-
AS/NZS 4455.1
Masonry units, pavers, flags and segmental retaining wall units - Masonry units
-
AS/NZS 4455.3
Masonry units, pavers, flags and segmental retaining wall units - Segmental retaining wall units
-
AS/NZS 4666:2012
Insulating glass units
-
AS/NZS 4765:2007
Modified PVC (PVC-M) pipes for pressure applications
-
AS/NZS 4765:2017
Modified PVC (PVC
-
M) pipes for pressure
applications
–
ANZIC 19
-
AS/NZS 4766:2006
Polyethylene storage tanks for water and chemicals
-
AS/NZS 4766:2020
Rotationally moulded buried, partially buried and non-buried storage tanks for water and chemicals
-
AS/NZS 4793:2009
Mechanical tapping bands for waterworks purposes
-
AS/NZS 4821
Protective footwear for firefighters - Requirements and test methods
-
AS/NZS 4824
Protective clothing for fire fighters, requirements and test methods for protective clothing used for wildland fire fighting (ISO 15384; 2003, MOD)
-
AS/NZS 4858
Wet area membranes
-
AS/NZS 4859.1:2002/Amdt 1:2006
Materials for the thermal insulation of buildings - General criteria and technical provisions
-
AS/NZS 4967
Protective clothing for firefighters - Requirements and test methods for protective clothing used for structural firefighting
-
AS/NZS 4998
Bolted unrestrained mechanical couplings for waterworks purposes
-
AS/NZS 4999
PVC-U maintenance shafts
-
AS/NZS 5000.2
Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
-
AS/NZS 5065:2005
Polythene and polypropylene pipes and fittings for drainage and sewerage applications
-
AS/NZS 5848
Bungy jumping
-
AS/NZS 60320.1:2004
Appliance couplers for household and similar general purposes - General requirements (IEC 60320-1, Ed. 2.0 (2001) MOD)
-
AS/NZS 60320.1:2012
Appliance couplers for household and similar general purposes - Part 1: General requirements (IEC 60320.1, Ed. 2.0 (2001) MOD)
-
AS/NZS 60335.2.100
Household and similar electrical appliances - Safety - Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
-
AS/NZS 60335.2.11
Household and similar electrical appliances - Safety - Particular requirements for tumble dryers
-
AS/NZS 60335.2.12
Household and similar electrical appliances - Safety - Particular requirements for warming plates and similar appliances
-
AS/NZS 60335.2.13
Household and similar electrical appliances - Safety - Particular requirements for deep fat fryers, frying pans and similar appliances
-
AS/NZS 60335.2.17
Household and similar electrical appliances - Safety - Particular requirements for blankets, pads and similar flexible heating appliances
-
AS/NZS 60335.2.21
Household and similar electrical appliances - Safety - Particular requirements for storage water heaters
-
AS/NZS 60335.2.25
Household and similar electrical appliances - Safety - Particular requirements for microwave ovens, including combination microwave ovens (IEC 60335-2-25:2002, IDT)
-
AS/NZS 60335.2.27
Household and similar electrical appliances - Safety - Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
-
AS/NZS 60335.2.3
Household and similar electrical appliances - Safety - Particular requirements for electric irons.
-
AS/NZS 60335.2.30
Household and similar electrical appliances - Safety - Particular requirements for room heaters
-
AS/NZS 60335.2.32
Household and similar electrical appliances - Safety - Particular requirements for massage appliances
-
AS/NZS 60335.2.35
Household and similar electrical appliances - Safety - Particular requirements for instantaneous water heaters
-
AS/NZS 60335.2.43
Household and similar electrical appliances - Safety - Particular requirements for clothes dryers and towel rails
-
AS/NZS 60335.2.5
Household and similar electrical appliances - Safety - Particular requirements - Particular requirements for dishwashers
-
AS/NZS 60335.2.59
Household and similar electrical appliances - Safety - Particular requirements for insect killers
-
AS/NZS 60335.2.61
Household and similar electrical appliances - Safety - Particular requirements for thermal-storage room heaters (IEC 60335-2-61 Ed 2.0, MOD)
-
AS/NZS 60335.2.66
Household and similar electrical appliances - Safety: - Particular requirements for water-bed heaters
-
AS/NZS 60335.2.7
Household and similar electrical appliances - Safety - Particular requirements for washing machines
-
AS/NZS 60335.2.73
Household and similar electrical appliances - Safety - Particular requirements for fixed immersion heaters
-
AS/NZS 60335.2.77
Household and similar electrical appliances - Safety - Particular requirements - Particular requirements for pedestrian controlled mains-operated lawnmowers
-
AS/NZS 60335.2.78
Household and similar electrical appliances - Safety - Particular requirements for outdoor barbeques
-
AS/NZS 60335.2.85
Household and similar electrical appliances - Safety - Particular requirements for fabric steamers
-
AS/NZS 60335.2.9
Household and similar electrical appliances - Safety - Particular requirements for grills, toasters and similar portable cooking appliances
-
AS/NZS 60335.2.98
Household and similar electrical appliances - Safety - Particular requirements for humidifiers
-
AS/NZS 60898.1
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Circuit-breakers for a.c. operation (IEC 60898-1 Ed. 1.2 (2003) MOD)
-
AS/NZS 60898.2
Circuit-breakers for overcurrent protection for household and similar installations - Circuit breakers for a.c. and d.c. operation
AS/NZS 60901
-
AS/NZS 60968
Self ballasted lamps for general lighting services - Safety requirements (IEC 60968:1988, MOD)
-
AS/NZS 61008.1:2011
Luminaires - General requirements and tests (IEC 60598-1, Ed. 7.0 (2008) MOD)
-
AS/NZS 61009.1
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - General rules (IEC 61009-1, Ed. 3.0 (2010) MOD)
-
AS/NZS 61347.1
Lamp controlgear - General and safety requirements (IEC 61347-1:2000, MOD)
-
AS/NZS 61347.2.3
Lamp controlgear - Particular requirements for a.c. and/or d.c. supplied electronic controlgear for fluorescent lamps
-
AS/NZS 61347.2.8
Lamp controlgear - Particular requirements for ballasts for fluorescent lamps
-
ASNZS 4129:2020
Fittings for polyethylene (PE)
pipes for pressure applications
-
ASTM B819-19
Standard Specification for Seamless
Copper Tube for Medical Gas Systems
-
ATS 5200.012:2005
Technical Specification for plumbing and drainage products Part 012: Control/isolating valves
-
ATS 5200.017
Technical Specification for plumbing and drainage products Part 017: Cistern outlet valves
-
ATS 5200.026
Technical Specification for plumbing and drainage products - Cold water storage tanks
-
ATS 5200.040
Technical Specification for plumbing and drainage products Part 040: Waste pipe connection outlets and gratings, separate or integral
-
ATS 5200.046
Technical Specification for plumbing and drainage products Part 046: Diversion systems - Wash down and first flush
-
ATS 5200.478
Technical Specification for plumbing and drainage products - Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
-
ATS 5200.482
Technical Specification for plumbing and drainage products - Soil waste dump fitting
-
BS 3193
Glass for domestic appliances
-
BS EN 1057
Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications
-
BS EN 13348:2016
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM
-
EN 124
Gully Tops And Manhole Tops For Vehicular And Pedestrian Areas - Design Requirements, Type Testing, Marking, Quality Control
-
EN 1279-2:2002
Glass in building - Insulating Glass Units - Part 2: Long term test method and requirements for moisture penetration
-
EN 1279-3:2002
Glass in building - Insulating Glass Units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
-
EN 13348
Copper And Copper Alloys - Seamless, Round Copper Tubes For Medical Gases Or Vacuum
-
EN 295-1:1991
Vitrified Clay Pipes And Fittings And Pipe Joints For Drains And Sewers - Part 1: Requirements
-
EN 295-4
Vitrified Clay Pipes And Fittings And Pipe Joints For Drains And Sewers - Requirements For Special Fittings, Adaptors And Compatible Accessories
-
EN 295-5
Vitrified Clay Pipes And Fittings And Pipe Joints For Drains And Sewers - Part 5: Requirements For Perforated Vitrified Clay Pipes And Fittings
-
EN 295-6
Vitrified Clay Pipes And Fittings And Pipe Joints For Drains And Sewers - Part 6: Requirements Of Vitrified Clay Manholes
-
EN 295-7
Vitrified Clay Pipes And Fittings And Pipe Joints For Drains And Sewers - Part 7: Requirements For Vitrified Clay Pipes And Joints For Pipe Jacking
-
EN 356
Glass In Building - Security Glazing - Testing And Classification Of Resistance Against Manual Attack
-
I.S. EN 295-1:2013
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS
-
ISO 15384
Protective clothing for firefighters ? Laboratory test methods and performance requirements for wild land firefighting clothing
-
ISO 15874-1
Plastics piping systems for hot and cold water installations - Polypropylene (PP) 15874-1 Part 1: General
-
ISO 15874-2
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes
-
ISO 15874-3
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings
-
ISO 16073
Wildland firefighting personal protective equipment - Requirements and test methods
-
ISO 17484-1:2014
Plastics piping systems - Multilayer pipe systems
for indoor gas installations with a maximum operating pressure up to
and including 5 bar (500 kPa) - Part 1: Specifications for systems
-
ISO 21005
Ships and marine technology - Thermally toughened marine safety glass panes for windows and side scuttles
-
NZS 4211:2008
Specification for performance of windows
-
NZS 4512:2010
Fire detection and alarm systems in buildings
-
SANS 1056-2:2012
Ball valves - Heavy duty valves (not fire safe)
-
SANS 1056-3:2016
Ball valves - Light duty valves (not fire-safe)
-
SANS 1480:2005
Single control mixer taps
-
SANS 1808-5:2010
Water supply and distribution system components - Flexible connectors
-
SANS 226:2016
Water taps (metallic bodies)
-
UN E-ECE-324 Regulation No 22
Motorcycle Helmets
-
WMTS 012
In-line valves for use in plumbing water supply systems – Miscellaneous types metallic and non-metallic
-
WMTS 017
Cistern outlet valves
-
WMTS 026
Cold water storage tanks
-
WMTS 040:2016
Waste pipe connection outlets and gratings, separate or integral
-
WMTS 046
Diversion systems – Wash down and first flush
-
WMTS 478
Cross-linked polyethylene/Aluminium/ Cross-linked polyethylene macro-composite pipe systems for pressure applications
-
WMTS 482
Soil waste dump fitting
-
WSA 132
Industry Standard for Ductile Iron Access Covers for Water Supply and Sewerage
-
WSA 137
Industry Standard for Maintenance Shafts and Maintenance Chambers for Sewerage
